Aluminium Coil 1050 H14 är en populär typ av aluminiumspole som vanligtvis används i olika branscher på grund av dess utmärkta egenskaper.
Det är en ren aluminiumlegering med 99,5% aluminiuminnehåll och har en hårdhet på H14. Detta innebär att det har genomgått stamhärdning
och har en måttlig styrka.
Några av egenskaperna som gör aluminiumspolen 1050 H14 populära inkluderar dess höga värmeledningsförmåga, utmärkt korrosionsmotstånd,
och bra bearbetbarhet. Det är också lätt, vilket gör det till ett idealiskt material för applikationer som kräver låg vikt.
Några av de vanliga tillämpningarna av aluminiumspole 1050 H14 inkluderar tak, beklädnad, isolering och förpackning. Det används också i
Tillverkning av olika produkter som köksredskap, redskap och apparater.
Sammantaget är aluminiumspolen 1050 H14 ett mångsidigt och pålitligt material som används allmänt i olika branscher på grund av dess utmärkta egenskaper.
1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%)
|
Alloy
|
1050 1050A 1060 1070 1100
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/
H26/H36 H18/H28/H38 H114/H194, etc.
|
Specification
|
Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C)
|
Application
|
Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc.
|
Feature
|
Lid Shigh conductivity, good corrosion resistant performance, high latent heat
of melting, high-reflectance, well welding property, low strength, and not
suitable for heat treatments.
|
2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element)
|
Alloy
|
3003 3004 3005 3102 3105
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/
H36 H18/H28/H38 H114/H194, etc.
|
Specification
|
Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C)
|
Application
|
Decoration, heat-sink device, external walls, storage, sheets for construction, etc.
|
Feature
|
Good rust resistance, not suitable for heat treatments, good corrosion resistant
performance, well welding property, good plasticity, low strength but suitable
for cold working hardening
|
3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element)
|
Alloy
|
5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06
|
Temper
|
O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34
H16/H26/H36 H18/H28/H38 H114/H194, etc.
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
Application
|
Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile
Body Sheets, Automobile Inside Board, The Protective Cover On Engine.
|
Feature
|
All the advantages of normal aluminium alloy, high tensile strength & yield strength,
good corrosion resistant performance, well welding property, well fatigue strength,
and suitable for anodic oxidation.
|
4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements )
|
Alloy
|
6061 6063 6082
|
Temper
|
O F, etc.
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
Application
|
Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components,
Transport Ship, Semiconductor Equipments, etc
|
Feature
|
Good corrosion resistant performance, well welding property, good oxidability,
easy to spray-finishing, well oxidation coloring, good machinability.
|